There are 93 products.
Starting capacitor 16uF and 20uF. Select type at checkout. Write in the text field. 20 uF is larger in scope, and then it may be that you have to hang it outside the holder if there is one. Most often, 16 uF is the standard.
Screw bearing for lower feed screw RS bearing, Fits the older models of Thermia BeQuem pellet burners.
Igniter 420 Watt
Suitable for PellX, Pellex, PX 20, PX 21, PX 50, PelleX pellet burners and Eurofire, Baxi, Ulma, TB Mini and more. Also found in pellet stoves such as K6, or KMP's pellet stoves with hot air ignition.
Ignition tubes for Thermia BeQuem 15 analogue and digital versions, enclose the electric coil itself, the ignition element. With thread.
Discontinued. Replaced with the bent element, as well as a new ignition tube.
Igniter BQ analogous to thread.
Pellet burner screw BeQuem BQ30/45/50 kW burner. The image can be misleading.
NB. With real ball bearings.
The chainring - chain wheels for the spg engines on the BeQuem 15, if you have changed to the SPG engine, not the Merkelkoff engine, it has a 12 mm. axle. is also on the BQ20D and BQ30D.
Oil flange bearings are usually located on the lower auger instead of ball bearings as they have on the newer models. 18x24x12 - 30x3 mm. there are 2 pieces there, inserted from each direction.
Igniter Thermia/Ariterm bent element. Sits in the pellet burner Ariter BeQuem. Is this part that ignites the pellets.
Replacement kit from Merkelkoff engine to SPG engine, complete kit.
Electrical cable - Power cable for e.g. pellet burner and other things. Placed via max thermostat or other.
Pipe elbow for BeQuem pellet burner 15-20-25kW, is mounted at the bottom, under the primary ring, the part where it burns and the burner's feed screw rests at the front edge. Available in different designs, with agitators, without, regular standard. What wears in this part is where the screw rests, and rubs against the cast iron, wears more and faster with poor pellet quality.
External motor alt. 2 kpl (larger) New Gråmet.
Is mainly for Ariterm products. for example. Flex screws up to approx. 2-8 meters.
Doser box complete for those with chain drive. Sits on Ariterm BeQuem 20 and also on¨Ariterm BeQuem 50.
External motor for external auger, the one that feeds pellets to the pellet burner, fits various augers that have SPG motor. 25 Watt. Standard engine.
Optovakt molex older model, before Year 2010. Choose the newer optoguard if you have a later model from 2010 onwards.
